EWM Welding Machine PHOENIX XQ 350 PULS DW

Description

EWM Welding Machine PHOENIX XQ 350 PULS DW

The Phoenix XQ 350 puls DW is a three-phase MIG/MAG inverter welding machine from EWM for industrial use: pulsed, multiprocess, water cooled (W) and decompact (D), i.e. with a separate Drive XQ wire feeder. It delivers 350 A at 100 % duty cycle at 40 °C and welds steel, CrNi and aluminium with solid and flux-cored wires.

Welding processes included

No need to purchase additional characteristics: all characteristics for this machine type are included in the scope of delivery ex works.

• MIG/MAG standard – short arc and spray arc welding.
• Pulse – low-spatter pulsed arc for steel, CrNi and aluminium.
• superPuls – switching between two operating points, with reduced heat input.
• forceArc^® XQ / forceArc^® puls XQ – high-performance arc with deep penetration.
• rootArc^® XQ / rootArc^® puls XQ – for root welding, with easy filler and final passes.
• Positionweld – positional welding of aluminium without special techniques.
• In addition: MMA welding, TIG welding and gouging.

Features

• Synergic control with one-knob operation; non-synergic operation for manual setting of welding parameters is also available.
• Synergic characteristics for solid wires in steel / CrNi / aluminium and for flux-cored wires.
• Individually configurable programs for JOBs (welding tasks), adjustable start and end-crater functions, infinitely adjustable arc dynamics.
• Perfect MIG/MAG weld seams even with long welding leads and long hose packages.
• Drive XQ wire feeder with EWM eFeed 4-roll drive to reliably feed all solid and flux-cored wires; insulated wire space.
• Excellent torch cooling: 1500 W cooling capacity, centrifugal pump and 8-litre coolant tank – lower wear on torch consumables.
• Energy-saving thanks to high efficiency (90 %) and standby function.
• Tool-free change of welding polarity; connection for remote control and function torch.
• flexFit casing system: accessories and options are fixed to the machine with conventional slot nuts; LED information bar showing the operating status.
• IP23 spray water protection.
• Optional network connectivity with the ewm Xnet software (via integrated or external gateway); PC interface for PC300 XQ software.
• Free EWM WPQR package for certification up to and including EXC2 in accordance with EN 1090, for welding unalloyed steels up to and including S355.

The set includes

The machine is controlled exclusively via the wire feeder and is connected to it by the intermediate hose package. It is therefore supplied as a set of three items:

1. Phoenix XQ 350 puls DW power source (item 090-005643-00001), with integrated water cooling unit, wheel kit with single gas cylinder mount and 5 m mains connection lead.
2. Drive XQ HP wire feeder (item 090-005570-00002), with HP-XQ control.
3. Water-cooled intermediate hose package, 14-pole, 70 mm² – choose one of the two lengths:
   • 5 m (item 092-003288-00005), when the wire feeder stays on or next to the machine;
   • 10 m (item 092-003288-00010), when the wire feeder is moved away from the machine, close to the welding point.

To weld you also need, outside the set: a water-cooled MIG/MAG torch with Euro connector, a workpiece lead with clamp, a gas pressure regulator, coolant and a CEE 32 A mains plug.

Drive XQ HP wire feeder

• HP-XQ control: direct access to all the important settings, with a welding flow chart for conveniently setting the welding parameters.
• Quick change between welding processes without JOB switching; arc length correction; arc dynamics adjustable from soft to hard.
• 256 JOBs with 16 freely adjustable programs per JOB; non-latched, latched, special non-latched and special latched (crater fill) operation and spot welding.
• Kilowatt display for calculating the energy per unit length; control unit lock at the push of a button.
• eFeed 4-roll drive (quadruple meshing), double ball bearings per axle, tool-free roll change, adjustable contact pressure for each roll pair.
• For 300 mm wire spools, and 200 mm wire spools with an adapter.
• Portable, light (15 kg) and compact; optionally suitable for crane lifting. Stable cast-aluminium base with sliding rails.
• Transparent protective cap keeps the welding parameters visible; interior lighting; electronics in a dust-free area.
• Protected connections for intermediate hose packages and control cables; hose packages can be changed without tools.

Intermediate hose package

• Control cables for high mechanical loads, torsion-resistant.
• Fabric-sheathed, diffusion-free shielding gas hoses; coolant lines marked in colour.
• Industrial-quality plug connectors that cannot be swapped accidentally; rapid action closures, tool-free assembly.
• Large cross-section (70 mm²) to prevent voltage drops.

Technical data of the power source

Good to know before ordering

• Requires a three-phase 400 V supply; for generator operation a rating of at least 18.8 kVA is recommended.
• The mains voltage can be adapted (440–460 V or 480–500 V) by a qualified electrician only.
• EMC class A: intended for industrial environments.
• Weight 125.5 kg and dimensions 1152 x 686 x 976 mm: plan for space and transport.
• The set is available on request. Contact us for price and delivery time, stating the hose package length you need (5 m or 10 m).

Manufacturer’s operating manuals (English, PDF): Phoenix XQ puls D power source · Drive XQ wire feeder · HP-XQ control