FLAIG FXE-T 7200/80 Electro-Permanent Magnetic Lifting Beam 7200 kg
The FLAIG FXE-T 7200/80 is an electro-permanent magnetic lifting beam for overhead cranes: it lifts steel sheets and plates up to 7,200 kg (1.2–6 m long) and beams up to 12 m, with radio remote control and single-sheet pick-up. The load stays held even during a power failure. Made in Germany, CE / EN 13155:2022.
Price and delivery time on request – call +30 210 5582077 or email info@roussakis.com.gr.
Datasheet (EN) · EC Declaration of Conformity · Operating instructions (EN) · Dimensional drawing
Description
FLAIG FXE-T 7200/80 – electro-permanent magnetic lifting beam, 7,200 kg
In short: The FLAIG FXE-T 7200/80 is an electro-permanent magnetic lifting beam made by FLAIG Magnetsysteme (Germany) for overhead cranes and hoists. It lifts flat steel sheets and plates up to 7,200 kg (from 25 mm thickness), 1,200 to 6,000 mm long and up to 3,000 mm wide, as well as beams and profiles up to 12,000 mm long. The magnet modules slide along the beam so their spacing matches the sheet size. It comes fully equipped: radio remote control with pick-up function for single sheets from 6 mm, 2-leg chain sling, 360° LED signal tower, lifting-eye sensor and a CEE 32 A connection cable for 380–480 V. Weight 520 kg. CE marked under the Machinery Directive 2006/42/EC and EN 13155:2022. Supplied in Greece by Roussakis Supplies (Aspropyrgos, Attica) on request.
Why an electro-permanent lifting beam
- Safe on power failure: power is only needed for a short magnetising or demagnetising pulse. Holding is done by permanent magnets, so the load is not released if the power fails.
- No energy used while lifting: no continuous current while the load hangs and no back-up battery needed for holding.
- One sheet at a time: the PICK-UP function magnetises at reduced force so only the top sheet is lifted from a stack (from 6 mm thickness).
- Release only without load: a sensor in the lifting eye allows demagnetising only once the load has been set down.
- One-person operation: radio remote with 8 m range or 4 push buttons on the beam (PICK-UP, FULL-MAG, SAFE, DE-MAG), with a 360° LED tower showing the status.
- Mechanical lifting: weld-on hooks at both ends, up to 4 t each.
Technical data
| Manufacturer | FLAIG Magnetsysteme GmbH & Co. KG, Hardt, Germany |
| Model | FXE-T 7200/80 (manufacturer no. 1068 7212) |
| Roussakis code | 10687212 |
| Type | Electro-permanent magnetic lifting beam (truss) |
| Working load limit (WLL) | 7,200 kg on plate from 25 mm |
| Breakaway force | 272 kN |
| Poles | 2 × 10, pole type 80 |
| Sheets and plates | length 1,200–6,000 mm, width up to 3,000 mm |
| Beams and profiles | length 1,200–12,000 mm, width 180–2,000 mm |
| Beam dimensions (L × W × H) | 2,960 × 783 × 784 mm · height with chain 1,900 mm |
| Weight | 520 kg |
| Power supply | 380–480 V, 50–60 Hz, CEE 32 A plug, 4 m cable |
| Protection class | IP65 |
| Load temperature | up to 80 °C |
| Standards | CE – Machinery Directive 2006/42/EC, EN 13155:2022, EN ISO 12100:2010 |
Lifting capacity by sheet thickness
| Thickness | Max. load | Max. sheet (L × W) |
|---|---|---|
| 4 mm | 500 kg | 4,000 × 2,000 mm |
| 6 mm | 1,000 kg | 6,000 × 2,500 mm |
| 8 mm | 1,400 kg | 6,000 × 2,500 mm |
| 10 mm | 2,000 kg | 6,000 × 3,000 mm |
| 15 mm | 4,000 kg | 6,000 × 3,000 mm |
| 25 mm | 7,200 kg | 6,000 × 3,000 mm |
On beams and profiles: 800 kg from 6 mm, 1,500 kg from 10 mm, 3,000 kg from 15 mm, 5,000 kg from 25 mm. Values apply to low-carbon steel (e.g. St37) with a clean, flat contact surface. Rust, paint, air gaps, alloyed steel (about 80% of capacity) and load temperatures above 80 °C reduce the holding force.
Scope of delivery
- Beam with sliding magnet modules
- Radio remote control with pick-up function
- 2-leg chain sling
- Lifting-eye sensor (demagnetising only without load)
- 360° LED signal tower
- Stainless steel guide handles
- Weld-on hooks at both ends (up to 4 t each)
- Mains-ready cable for 400 V / 25 A with CEE 32 A plug
Applications
Steel service centres and stockholders, loading laser, plasma and oxy-fuel cutting machines, steel construction, shipyards and heavy fabrication – wherever steel sheets, plates, beams and profiles must be loaded, unloaded and moved quickly and safely without slings or hooks.
Operating video
Frequently asked questions
What is an electro-permanent magnetic lifting beam?
It is a crane-suspended beam with magnet modules that lifts ferromagnetic loads (sheets, plates, beams) without slings. Electro-permanent magnets are switched on and off by a short electrical pulse, while the holding force comes from permanent magnets.
What happens if the power fails during a lift?
The load stays held, because the FXE-T 7200/80 does not need power to hold it. When power returns, the white DE-MAG LED flashes and the operator runs a new FULL-MAG cycle before continuing.
How much can it lift on a 10 mm plate?
Up to 2,000 kg, on sheets up to 6,000 × 3,000 mm. On 6 mm up to 1,000 kg, on 15 mm up to 4,000 kg and on 25 mm up to 7,200 kg.
Can it lift a single sheet from a stack?
Yes. The PICK-UP function of the remote control magnetises at reduced force so only the top sheet is lifted, from 6 mm thickness upwards.
What power supply does it need?
Three-phase 380–480 V, 50–60 Hz, with a CEE 32 A plug. The connection cable is supplied ready to plug in. The line fuse is specified in the operating instructions.
Which certifications does it have?
CE marking under the Machinery Directive 2006/42/EC, with the harmonised standards EN 13155:2022 (non-fixed load lifting attachments) and EN ISO 12100:2010. The manufacturer’s Declaration of Conformity is available below.
Where can I buy it in Greece and how do I get a price?
From Roussakis Supplies in Aspropyrgos, Attica. Price and delivery time are given by quotation: call +30 210 5582077 or email info@roussakis.com.gr quoting code 10687212.
Manufacturer documents
Additional information
| Weight | 520 kg |
|---|---|
| Dimensions | 296 × 78,3 × 78,4 cm |
| brand | FLAIG |
Related products
-
LTF Adjustable Angle Welding Magnet 124.06
133,83 €Original price was: 133,83 €.107,06 €Current price is: 107,06 €. (excl. VAT 86,34 €)Add to cart -
FLAIG FX-VV800 Permanent Lifting Magnet
1.882,42 €Original price was: 1.882,42 €.1.505,94 €Current price is: 1.505,94 €. (excl. VAT 1.214,46 €)Add to cart










